Nowadays, once it comes to Internet surfing on Windows computers, most people resort to WiFi networks for ease of convenience. Usually, it won’t take a lot of time and effort to connect Windows computers to WiFi networks. That being said, the connection process may experience issues out of the blue and complicate access to the Internet. If your PC keeps displaying a message that says “some information changed since the last time you connected” during connection, this article is for you.
In layman’s terms, if your Network Adapter acts up, it’s natural for errors to surface as you connect to WiFi networks. On the bright side, there is no need to do much to get rid of Network Adapter problems.
A weak connection to the Wi-Fi network can result in all sorts of errors and associated warnings. Hence, if you come across the “some information changed since the last time you connected” message, take connection into account.
A Few Fixes
Windows is a solid operating system but it develops hiccups from time to time. Therefore, before using complex procedures, you may want to reconnect to your Wi-Fi network.
- Step 1: Look to the bottom right of your taskbar, select the Wi-Fi icon and choose Network Settings.
- Step 2: In Settings, hit WiFi and click Manage known networks.
- Step 3: Locate your Wi-Fi network from the list, choose it and select Forget.
- Step 4: Close Settings, connect to your Wi-Fi network and enter the password again.
- Step 5: Determine whether the connection proceed as expected
Run Network Adapter Troubleshooter
Windows 10 packs a couple of built-in troubleshooters that can diagnose and address multiple problems on computers. If you have a hard time connecting to WiFi networks, you should run the network adapter troubleshooter by going through the following steps:
- Step 1: Go to Search bar, type Troubleshooting and hit Enter.
- Step 2: Select Additional troubleshooters.
- Step 3: Choose Network Adapter, hit Run the troubleshooter and wait until the process concludes.
- Step 4: If the troubleshooter manages to identify the root cause, apply its fix and restart your computer.
Update Network Adapter Driver
For yout information, the obsolescence of network adapter drivers can mess up the connection to WiFi networks. Because of that, you must consider updating your W-Fi network adapter drivers to the latest versions.
- Step 1: Press Windows + R.
- Step 2: Type devmgmt.msc then hit Enter to open Device Manager.
- Step 3: Expand the Network Adapter, right-click each of the drivers and click Update Driver.
- Step 4: Once the update wraps up, connect to your WiFi network again and see how things turn out.
- Step 1: Go to Search bar, type cmd, right-click Command Prompt and pick Run as administrator. If Windows 10 User Account Control prompt pops up, select Yes.
- Step 2: In Command Prompt (Admin), type netcfg -d and hit Enter.
- Step 3: Restart your computer.
- You can achieve an optimal Internet experience by making sure that all of your network accessories come from the same brand.
- While assessing a Wi-Fi router, determine whether it uses wireless-N or wireless-G technology. If you can help it, stick to units that use wireless-N technology because they provide superior range and stability.
- Always set up your router in a central location to extend coverage. For example, in a two-storey building, the ideal position for routers is on a shelf on the first floor. That is going to provide ample signal coverage for devices on both floors.
- Replacing the stock antenna of your router can boost Wi-Fi Internet speed and coverage. Manufacturers usually install omnidirectional antennas on their routers in the factory. While omnidirectional antennas improve maximum coverage, they have mediocre speed and strength. Thus, you should replace omnidirectional antennas with high-gain units to concentrate the signal toward a direction.
What Should I Do If My Windows 10 Computer Cannot Connect To Wi-Fi?
If you have trouble connecting to WiFi, you should reset your network settings.
To reset network settings, open the Start menu, hit the gear icon to open Settings then choose Network & Internet. Next, scroll down to the bottom of the window and click Network reset. Once prompted, click Reset now. That would let you remove and reinstall all of your network adapters. Furthermore, your network settings would be restored to their defaults.
Is It Possible To Increase The Wi-Fi Connection Speed?
If your Windows computer takes a long time to connect to the Wi-Fi, it may have outdated drivers. That means you should think about updating the Wi-Fi Network Adapter drivers.
How Come My Internet Connection Slows Down After A Windows 10 Update?
Updates usually improve the performance of Windows 10 but some of the features take time to calibrate. Depending on the situation, you may need to uninstall the update.
What Must Be Done To Boost My Laptop’s Internet Speed?
You can increase Internet speed by placing your router close to your PC. Also, don’t let walls, ceilings, furniture, appliances and other obstacles block signals of the router. It’s noteworthy that you could increase your Internet speed by switching your computer’s frequency band to 5GHz. While it has a short range, 5GHz offers a fast transfer speed. Finally, Wi-Fi boosters effectively and efficiently increase Wi-Fi reception for most of the time.
Hoang Tu is a seasoned Microsoft Windows expert with a strong IT background. Studying at Hanoi Bach Khoa University, he gained valuable experience at Hanoi Computer and FPT Soft before joining Milagro Mobile Marketing. Specializing in providing tips and tutorials on Windows for global users, Hoang Tu’s expertise covers various Windows versions. With a talent for clear communication, he offers practical solutions and advice to users of all skill levels. His dedication to empowering individuals in their Windows experience has earned him recognition in the tech community, making him a trusted resource for optimizing system performance and resolving technical issues.