Introduced in 2010, HP Envy 7640 didn’t need long before becoming one of the best all-in-one printers for offices, households and schools worldwide. That being said, while HP Envy 7640 is a solid printer, it’s known for acting up out of the blue. For instance, HP Envy 7640 may experience driver issues on occasions which cause it to go haywire. Take a look at this article if you have no idea what must be done once it comes to HP Envy 7640 driver unavailable.
Approaches To The Situation
Uninstall And Reinstall
Regarding HP Envy 7640 driver unavailable, there is a good chance that the printer driver is damaged, corrupted and so on. To get the printer back to work, you should uninstall and reinstall driver.
- Step 1: Press Windows + R key, type devmgmt.msc and click OK.
- Step 2: In Device Manager, locate your printer, right-click it and pick Uninstall device.
- Step 3: Check the checkbox next to Delete the driver software for this device, hit OK and restart your PC.
As your PC restarts, your computer is going to reinstall the driver for your printer. After the process finishes, fire up your printer and see how things turn out. You can also download drivers from HP Customer Support.
Use HP Print And Scan Doctor
In layman’s terms, HP Print and Scan Doctor is an app that could identify and fix a wide range of issues on HP devices. Naturally, in discussions about HP Envy 7640 driver unavailable, many people believe that it’s wise to give HP Print and Scan Doctor a go.
- Step 1: Download HP Print and Scan Doctor and install it by following the on-screen instructions.
- Step 2: Select Start on the welcome screen to view all available printers.
- Step 3: Choose your printer from the list and hit Next.
- Step 4: Now click Fix Printing and review the test results.
Note! In the case that your printer is not displayed, select My product is not listed, follow the on-screen instructions and select Retry.
If the test result ends up in a green checkmark, your printer has passed the test. However, if you witness a wrench icon, that means HP Print and Scan Doctor has found an issue and repaired it.
Think About Corrupted System Files
If you are still unable to get your printer to resume operation, it is possible that some of your system files might be corrupted. On the bright side, Windows allows you to take care of corruption using System File Checker.
- Step 1: Go to search bar, type CMD and hit Run as administrator. Select Yes for UAC prompt.
- Step 2: Run the following command down below in Command Prompt (Admin):
sfc /scannow
- Step 3: The moment the process warps up, restart your computer.
How Do I Know If A Driver Is Corrupted?
On Windows, corrupted drivers result in many problems including the spine-chilling Blue Screen of Death (BSOD). By taking action as soon as driver corruption is detected, you could reduce the odds of errors down the line. At the moment, you can tell if one of your drivers is corrupted by using the Windows Driver Verifier.
Note! When using the Windows Driver Verifier utility, you must always exercise extreme caution since it has the potential to lock you out of your system. Make sure you have a restore point ready or backup of all of your data before using Driver Verifier. If things go south, immediately boot into the Safe Mode before returning to regular Windows
- Step 1: Go to Search bar, type CMD and hit Run as administrator. Select Yes for UAC prompt.
- Step 2: In Command Prompt (Admin), run the command verifier.
- Step 3: A list of tests should now be shown to you. Uncheck DDI Compliance Checking (additional) and Randomized low resources simulation from the list and press the Next button.
- Step 4: Press the Next button again and choose Select driver names from a list option. The driver information loading screen should now appear. A list of all the installed drivers should now be visible to you so proceed to select the drivers you want to verify and click the Finish button.
How Do I Clear Paper Jams On HP Envy 7640?
NOTE: Paper jams can be true or false. Your printer might report when there is no jam.
- Step 1: Locate the jammed paper. Gently year the paper from the input/output tray, ink cartridge access area, and automatic document feeder.
- Step 2: Clean rollers in the paper feeder, ADF rollers, and separator pad.
- Step 3: Reset your printer.
- Step 4: Take your printer to the authorized HP service center.
For thorough or more details, please follow this HP printer document.
Hoang Tu is a seasoned Microsoft Windows expert with a strong IT background. Studying at Hanoi Bach Khoa University, he gained valuable experience at Hanoi Computer and FPT Soft before joining Milagro Mobile Marketing. Specializing in providing tips and tutorials on Windows for global users, Hoang Tu’s expertise covers various Windows versions. With a talent for clear communication, he offers practical solutions and advice to users of all skill levels. His dedication to empowering individuals in their Windows experience has earned him recognition in the tech community, making him a trusted resource for optimizing system performance and resolving technical issues.