It’s not uncommon for LG G3 to bug out all of a sudden and LG G3 stuck on LG logo is one of the consequences. If you have a hard time getting your LG G3 to go past the LG logo, you should restart the device. Also, you could make use of LG Bridge, wipe cache, perform a factory reset and send in the device for repair. Continue reading to be able to bring your LG G3 back to normal and enjoy it to the fullest.
Triggers
In use, LG G3 may act up every now and then but once it comes to LG G3 stuck on LG logo, you must consider these suspects:
Bugs
While devices that run on Android usually give a good account of themselves, they still experience bugs at times and LG G3 is no exception. Depending on the situation, bugs could mess up the bootup sequence which makes LG G3 stuck on LG logo. Struggle to reach the home screen of your LG G3? Then it’s strongly recommended that you give LG G3 some thought.
Corruption
As time passes by, a lot of things on LG G3 from the cache to the Android OS could become corrupted. At best, corruption may prevent the device from performing to its full potential in the course of operation. At worst, the device is going to turn into a paperweight due to the presence of corruption. Unless you take action, there is no way your LG G3 would work as expected.
Hardware
Introduced nearly a decade ago, LG G3 is getting on the years and reports of hardware issues pop up from time to time. If the device is unable to go past the LG icon upon bootup, you should take hardware into account.
A Few Fixes
Restart
Among the solutions for bugs on Android, not many could match restart in terms of effectiveness and efficiency. Hence, if your LG G3 keeps stopping at the LG logo every time you boot it up, restart the device. To do so, press and hold Volume Down and Power buttons at the same time. Alternatively, you could stimulate a restart by getting the battery out and putting it back in.
Make Use Of LG Bridge
In case you don’t know, LG Bridge is designed to help people manage their LG devices including smartphones. By taking advantage of LG Bridge, you could address many issues that plague your LG G3.
- Step 1: On your computer, download and install LG Bridge (link)
- Step 2: Power off your phone then connect it to your computer.
- Step 3: Press and hold the Volume Up button on your phone to enter Download mode.
- Step 4: On your computer, open LG PC Suite and hit Repair. Next, follow on-screen instructions, let the process run from start to finish and boot up your phone.
- Step 5: Witness the result.
Wipe Cache
You suspect corruption in the cache is the root of the problem? Then it’s widely advised that you clear cache.
- Step 1: Power off your phone.
- Step 2: Press and hold Volume Down and Power buttons at the same time.
- Step 3: As soon as the LG icon appears, release the button and press them again.
- Step 4: In System Recovery screen, navigate to Wipe cache using Volume buttons and hit the Power button. Confirm your decision if prompted.
- Step 5: Use Volume buttons to navigate to Continue Power up and hit the Power button.
Perform A Factory Reset
If none of the above brings positive results, you have no choice but to perform a factory reset.
- Step 1: Power off your phone.
- Step 2: Press and hold Volume Down and Power buttons at the same time.
- Step 3: As soon as the LG icon appears, release the button and press them again.
- Step 4: In System Recovery screen, navigate to Factory data reset using Volume buttons and hit the Power button. Confirm your decision if prompted.
- Step 5: Allow the process to go all the way.
Send In The Device For Repair
Generally speaking, once it comes to hardware issues, you could do little from your end. Your best bet is to bring your LG G3 to the store where you buy it and send in the device for repair. The length of repair varies from case to case but it’s highly likely that you need to wait for several days. If your LG G3 is still under warranty, you don’t have to pay but if the warranty is no longer valid, prepare to cover the expense. on your own
LG Phones Not Charging: Troubleshooting
- Press and hold Volume Down and Power buttons at the same time.
- Take a look at the USB cable, charger and power outlet. If one of them seems damaged, look for a replacement.
- Remember the signs:
- A battery icon means that your phone is charging fine.
- A (flashing) red light means that your battery is fully discharged and requires about 30 minutes of charge time before restarting.
- If nothing appears, your screen might be the cause of the problem.
Insights Into The Lifespan Of LG Phones
According to LG, their products usually have a lifespan of 1.5 to 2 years on average. Of course, your LG G3 could hold together for a long time if you take good care of it.
Experienced Mobile Developer with a demonstrated history of working in the computer software industry. Skilled in Android/Kotlin, iOS/Swift, Node.js/TypeScript. Strong engineering professional strengthening my foundations at Oklahoma State University. My Linkedin: Profile